4-23Phaser 3635MFP REP 7.1, REP 7.2Repairs and AdjustmentsDraft 4REP 7.1 Bypass Feed AssemblyParts List on PL 7.10RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the UI assembly, REP 2.1.3. Remove the scanner assembly, REP 14.1.4. Remove the front cover assembly, PL 28.10 Item 7.5. Remove the front mid cover, REP 28.3.6. Disconnect CN37 from the Main PWB.7. Remove the bypass feed assembly, Figure 1.Figure 1 Bypass feed removalReplacement1. Replacement is the reverse of the removal procedure.REP 7.2 Registration Solenoid and Tray 1 Pickup SolenoidParts List on PL 8.25RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the left cover, REP 28.1.2. Remove the main drive assembly, refer to REP 4.1.3. Disconnect CN36 on the Main PWB.4. Remove the relevant component:• Tray 1 pickup solenoid, PL 8.25 Item 19.• Registration solenoid, PL 8.25 Item 18.Replacement1. Replacement is the reverse of the removal procedure.1Remove 4 screws, then remove thebypass feed assembly.
