Xerox Phaser 3635MFP Service Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox Phaser 3635MFP Service Manual Manual pdf 131 page image

4-15Phaser 3635MFP REP 5.4Repairs and AdjustmentsDraft 4REP 5.4 DADF Transport Assembly and DADF FeedAssemblyParts List on PL 5.30 and PL 5.35RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF rear cover, PL 5.10 Item 9.3. Remove the DADF door assembly, PL 5.10 Item 3.4. Remove the DADF lift solenoid, REP 5.2.5. Disconnect the following connectors from the DADF PWB:• CN1• CN5• CN7• CN8• CN96. Remove the DADF transport and feed assemblies, Figure 1.NOTE: The DADF transport and feed assemblies are removed as a unit.Figure 1 Transport and feed assemblies removal7. If required, separate the DADF feed assembly from the DADF transport assembly, Figure2.1Remove 2 screwsat the rear.2Remove 3 screwsat the front.4Remove 1 screw beneath the DADF.5Lift the DADF feed andtransport assemblies outof the DADF lower coverassembly.