4-18 Phaser 3635MFPREP 5.6, REP 5.7Draft 4Repairs and AdjustmentsREP 5.6 DADF Paper Length SensorParts List on PL 5.20RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF rear cover, PL 5.10 Item 9.3. Remove the DADF front cover, PL 5.10 Item 10.4. Remove 3 screws to remove the input tray, PL 5.20 Item 1.5. Remove the sensor assembly cover, PL 5.20 Item 12.6. Remove the DADF paper length sensor, PL 5.20 Item 11.Replacement1. Replacement is the reverse of the removal procedure.REP 5.7 Pickup AssemblyParts List on PL 5.25RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF door assembly, PL 5.10 Item 3.3. Release the pickup spring PL 5.25 Item 7,4. Remove the pickup assembly, Figure 1.Figure 1 Pickup assembly removalReplacement1. Ensure that the pickup assembly is correctly installed into the DADF door assembly, Fig-ure 2.1Rotate the locking collars into thevertical position2Carefully unclip the pickup assem-bly from the DADF door assembly
