Xerox Phaser 3635MFP Service Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox Phaser 3635MFP Service Manual Manual pdf 133 page image

4-17Phaser 3635MFP REP 5.5Repairs and AdjustmentsDraft 4REP 5.5 DADF Drive AssemblyParts List on PL 5.40RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF rear cover, PL 5.10 Item 9.3. Remove the DADF door assembly, PL 5.10 Item 3.4. Remove the DADF lift solenoid, REP 5.2.5. Remove the DADF transport and feed assemblies, REP 5.4.6. Remove the DADF drive assembly, Figure 1.Figure 1 Drive assembly removal7. Remove the registration solenoid, pickup solenoid or scan motor as required, Figure 2.Figure 2 Solenoid and motor removalReplacementWARNINGEnsure all ground leads are connected.1. Replacement is the reverse of the removal procedure.4Remove 2 screws Marked A,then the drive assembly.1Disconnect thedoor open sensor.2Disconnect the scan motor.3Release theharnesses.DADF pickupsolenoidDADF registrationsolenoidDADF scan motor