4-13Phaser 3635MFP REP 5.1, REP 5.2Repairs and AdjustmentsDraft 4REP 5.1 DADF Door Open SensorParts List on PL 5.40RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF rear cover, PL 5.10 Item 9.3. Remove the DADF door open sensor, PL 5.40 Item 13.Replacement1. Replacement is the reverse of the removal procedure.REP 5.2 DADF Lift SolenoidParts List on PL 5.15RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the DADF rear cover, PL 5.10 Item 9.3. Remove the DADF front cover, PL 5.10 Item 10.4. Remove the input tray assembly, PL 5.15 Item 2.5. Remove the DADF lift solenoid, Figure 1.Figure 1 Lift solenoid removal1Remove 1 screw.2Disconnect CN6 from theDADF PWB.3Release the harness clamp toallow the DADF lift solenoid to beremoved.
