Toshiba TOSVERT VFS15-2004PM-W1 Instruction Manual

Also see for TOSVERT VF-S15 series: Function manual Quick start manual Instruction manual Instruction manual Instruction manual

E6581611F-6962) Optional dynamic braking resistorsOptional dynamic braking resistors are listed below. All these resistors are 3%ED in operation rateBraking resistorInverter type Type-form RatingContinuousregenerative brakingallowable capacityVFS15-2004PM-W, 2007PM-WVFS15S-2002PL-W～2007PL-W PBR-2007 120W-200Ω 90WVFS15-2015PM-W, 2022PM-WVFS15S-2015PL-W, 2022PL-W PBR-2022 120W-75Ω 90WVFS15-2037PM-W PBR-2037 120W-40Ω 90WVFS15-2055PM-W, 2075PM-W PBR7-004W015 440W-15Ω 130WVFS15-2110PM-W, 2150PM-W PBR7-008W7R5 880W-7.5Ω 270WVFS15-4004PL-W～4022PL-W PBR-2007 120W-200Ω 90WVFS15-4037PL-W PBR-4037 120W-160Ω 90WVFS15-4055PL-W, 4075PL-W PBR7-004W060 440W-60Ω 130WVFS15-4110PL-W, 4150PL-W PBR7-008W030 880W-30Ω 270WNote 1: The data in Rating above refer to the resultant resistance capacities (watts) and resultant resistancevalues (Ω).Note 2: Braking resistors for frequent regenerative braking are optionally available. For more information,contact your Toshiba distributor.Note 3: Type-form of “PBR-” indicates the thermal fuse”. Type-form of “PBR7-“ indicates the thermal fuseand thermal relay.Note 4: The default setting values of parameter f308 (Dynamic braking resistance) and f309 (Dynamicbraking resistor capacity) are applied to braking resistor option.3) Minimum resistances of connectable braking resistorsThe minimum allowable resistance values of the externally connectable braking resistors are listed in thetable below.Do not connect braking resistors with smaller resultant resistances than the listed minimum allowableresistance values.240V Class 500V ClassInverter ratedoutput capacity(kW)Resistanceof standardoptionMinimumallowableresistanceResistanceof standardoptionMinimumallowableresistance0.2 200Ω 55Ω - -0.4 200Ω 55Ω 200Ω 114Ω0.75 200Ω 55Ω 200Ω 114Ω1.5 75Ω 44Ω 200Ω 67Ω2.2 75Ω 33Ω 200Ω 67Ω4.0 40Ω 16Ω 160Ω 54Ω5.5 15Ω 12Ω 60Ω 43Ω7.5 15Ω 12Ω 60Ω 28Ω11 7.5Ω 5Ω 30Ω 16Ω15 7.5Ω 5Ω 30Ω 16ΩNote: Be sure to set f308 (Dynamic braking resistance) at the resistance of the dynamic braking resistorconnected.