Honeywell Galaxy Flex Installer Manual

Also see for Galaxy Flex: User guide

Contents

Honeywell Galaxy Flex Installer Manual Manual pdf 61 page image

Galaxy Flex Installer Manual Group Omit [46]61Use the System Print Timers [57.11] option to print all of the programmed timers; WeeklySchedule, Timer Outputs, and Autoset.Holidays [45.2]Use this function to allocate up to 4 holiday calendars.Timers [45.3]If Timer Access [51.43] is enabled these sub-options are available:1=Name2=Status3=Events4=Hol. Period5=Hol. Sched6=Pattern DayFor information on how to use these options refer to Weekly Schedule [65.1].If Timer Access [51.43] is disabled, you can only change the programmed weekly timerschedules status (either Off or On). All timer schedules default to Off.Late Work [45.4]Use this option to authorize an Autoset Extension in advance of the pre-warning period(refer to Autoset [65.3]).Note: Additional extensions can be authorized by entry of a valid code during thesubsequent autoset pre-warning periods.Weekend Work [45.5]The Weekend Work option allows a valid user code to authorize the system to unset at theweekend.Access Template [45.6]An access template defines when and where a user is allowed access. For each accesstemplate, a schedule is given to each group (area) to define when access to each group ispossible. Up to 20 templates are available per system. If no schedule is given to a group, theuser will have full access to the group.Group Omit [46]Use this option to block omit all the omittable zones that are open at the end of the confirmtime in a group or multiple groups. All zones in the required groups that have the omitattribute enabled (refer to Omit [52.4]) are omitted when this option is selected. Groups canbe omitted and reinstated without setting and unsetting the system. You need type 6 status touse this option.