Galaxy Flex Installer Manual Quick Menu [59]157Quick Menu [59]The quick menu consists of up to ten menu options that are accessed by all type 3 user codesand above that do not have a assigned to their code type. You can reprogram the quickmenu to include any menu options. The default settings are shown in the following table:QuickMenu No.Menu Option UserType0 Omit Zones [11] 31 Chime [15] 32 Display Zones [21] 43 Display Log [22] 44 Print [24] 45 Walk Test [31] 56 Time/Date [41] 67 Codes [42] 18 Summer [43] 69 Eng. Access [48] 6Modifying the Quick MenuOn selecting the Quick Menu option, the details of the first option assigned are displayed.This includes the quick menu location, the assigned menu option, the full menu optionnumber and the assigned user type.To modify the quick menu:1. Type, or navigate to, a quick menu number, and then press ent.2. Type, or navigate to, a full menu number (11 to 72), and then press ent.To delete a quick menu option: Press instead of a full menu number. =NOT USED is displayed.The system arranges the quick menu in order of lowest user type access required, thereforeif quick menu number 0 is assigned a menu option which is of a higher access type thanoptions 2, 3 and 4, the menu is rearranged and the display indicates that the option is nownumber 4.Note: You cannot assign duplicate quick menu options. The message DUPLICATEENTRY is displayed and the system prompts for a new option to be assigned.0=OMIT ZONESOption=[11] L=3quick menu locationfull menu option numbermenu optionsuser type (user level)
