Honeywell Galaxy Flex Installer Manual

Also see for Galaxy Flex: User guide

Contents

Honeywell Galaxy Flex Installer Manual Manual pdf 33 page image

Galaxy Flex Installer Manual Set with cards/tags/fobs33push-set zone closing, the entry/exit horn and keypad buzzers become silent for fourseconds, then emit two long tones to confirm that the system is set.Note: If the keyswitch has its Part attribute enabled (Refer to the Program Zones [52]option) then the keyswitch part sets the system.Unset with a keyswitchActivating a keyswitch, when the group that it is assigned to is set, instantly unsets thegroup. All other groups that have been 'starred' to the keyswitch are also unset.Set with cards/tags/fobsProximity cards can be used to set and unset the system. You do this by assigning one of thesetting options (refer to MAX Function [42.1.7]) to a user.When a card is held against a MAX module or KeyProx for 3 seconds, the card heldfunction programmed to the card user is activated. For access control readers, a functionbutton or triple swipe is required to activate the card function.If the card user has a keypad assigned, the function is shown at the assigned keypad.If the card user has no keypad assigned then all keypads in the group assigned to the carduser display Press any Key. If a key is pressed the keypad containing the key to be pressed shows the card heldfunction. If no keys are pressed all keypads in the group(s) allocated to the card show the heldmenu function.If the card user has group choice all groups available to the user are displayed on thekeypad. The user must select the groups to be set/unset/part set using the appropriatenumber keys, as per normal PIN users.If the card user has no group choice then the card held setting function starts automatically.Unset with Proximity CardsThe system or groups can be unset using proximity cards with MAX, KeyProx modules andaccess control readers.If the unsetting procedure has been started by activating a final or entry zone, then swipingthe card unsets the system.If the card user has group choice, then only the group assigned to the final or entry zone isunset. All other groups available to the user are displayed on the programmed/selectedkeypad or KeyProx.Note: The reader module and the proximity card user must have common groups to allowthe card held function to be activated.