Keypad [58] Galaxy Flex Installer Manual154Keypad [58]You can assign individual attributes to each keypad to control how each responds.On selecting the Keypad option, details of the first keypad connected to the system aredisplayed.To select a keypad address enter its address or by use A and B and then pressing ent.1=A-key is displayed. Press A or B to select the required option, and then press ent.Note: When the address of the keypad currently being used is displayed, a black squareflashes on and off over the first digit of the keypad address.A-key [58.1]Code StatusUse this option to assign a function to the A key. When you select the option, 1=CodeStatus is displayed. The options are:0=OFF [ ] A key disabled.1=WITH CODE [+] A key requires code to be entered prior to operation.2=NO CODE [–] A key is a single touch operation no code is required.Select the required Code Status, and then press ent.Note: The Code Status assigned to the key is displayed when selecting the keypadaddress, for example A[12], which indicates that the A key does not require a usercode.Menu OptionTo assign one of the options to the A key, press A to select 2=Menu, and then press ent. Thecurrently assigned option is displayed.To assign a new function, enter the full menu option number 11 to 72, or press the A or Bkeys until the required option is displayed; press ent to accept the selection and return to theprevious menu level.B-key [58.2]B key programming is identical to that of the A key.10 A-key Option12=Timed Set10 A[12]+ B[13]-Mimic=1 Light=1keypad address option 1option 3option 2option 4flashing cursor if thisis the viewed keypad
