Honeywell Galaxy Flex Installer Manual

Also see for Galaxy Flex: User guide

Contents

Honeywell Galaxy Flex Installer Manual Manual pdf 47 page image

Galaxy Flex Installer Manual Walk Test [31, Quick Menu 5]47Test optionsWalk Test [31, Quick Menu 5]Walk Test menu31 = Walk Test 1 = View – not used 2 = Activate 1 = Silent 1 = Test all Zones 2 = Selected Zones 2 = Audible 1 = Test All Zones 2 = Selected ZonesView [31.1] Not usedActivate silent test on all zones [31.2.1.1] &Activate audible test on all zones [31.2.2.1]Use these options to starts an immediate walk test on all zones that have the omit attributeenabled (refer to Program Zones [52]). Non-omittable zones are not included and remainactive throughout the test. If all zones are non-omittable NO ENTRIES is displayed.Activate silent test on selected zones [31.2.1.2] &Activate audible test on selected zones [31.2.2.2]Use these options to select specific zones to test.1. Navigate to a zone you want to test (use A or B or type a zone number).2. Press # to toggle the test status to TEST.3. Repeat the steps above until you have selected all the zones you wish to test.4. Press ent to start the test.Alternatively:1. Press to include all zones.2. Navigate to any zones you wish to exclude (press # to exclude a zone).3. Press ent to start the test.