Diagnostics [61] Galaxy Flex Installer Manual158Engineer 2Diagnostics [61]Use this option to run these diagnostic tests: the communication integrity between the panel and modules voltage measurements resistance measurements module version checks panel memory checks fuse checksThis option is split into two sections: Latest: providing real time diagnostic information for the system. Historical: a snapshot of the system diagnostic status can be generated and saved.Latest [61.1]The Diagnostic options are:1=MEMORY TEST this option forces a check of the panel memory.2=KEYPAD COMMS the communication level between the panel and the keypads.3=RIO COMMS the voltage and version at each RIO as well as the communicationlevel between the panel and the RIO.4=PSU COMMS the voltage at each Power Supply Unit and the communicationlevel between the panel and the SPSUs. It is identical to the RIOCOMMS diagnostic with the exception that it also indicates thefuse status and battery status. A number to the right of the currentindicates a blown fuse:2=Battery fault3=+12V Auxiliary 1 fault4=Not Used5=Not Used6=Not UsedA indication means low battery or a missing battery.95% 2 13.6V5=MAX COMMS the communication level between the panel and the MAX/DCMreaders.6=COMM MODULES the communication level between the panel and the Int Telecoms,Ethernet/GPRS, ISDN, GSM, the USB, and the Audio Module.
