4-4 Sending Faxes With the MultiPASS L6000 Chapter 4m When the document has been sent successfully, the displayshows this message.The MultiPASS automatically redials if the receiving fax doesnot answer, if the line is busy, or if a transmission error occurs.You can specify the number of times it redials using theAutomatic Retries option in the Send Fax dialog box of theMultiPASS Desktop Manager (see page 8-4). If all redialattempts fail, the MultiPASS beeps intermittently for a fewseconds. If this happens, check the fax number and try sendingthe fax again.If the ALARM light is flashing, correct the error described in theLCD display, and then press STOP. You may need to open theoperator panel to remove the document from the ADF (seepage 10-3).Automatic DialingYou can send a document using one-touch speed dialing, coded speeddialing, or group dialing. You must register the one-touch speed dialingnumbers, the coded speed-dialing numbers, and the group dialingnumbers using the MultiPASS Desktop Manager before you can senddocuments using these automatic dialing methods. See Setting Up YourSpeed Dial Assignments on page 3-18.m Place the document facedown in the ADF.DOCUMENT READYLoad thedocument.1TRANSMITTING OK
