2-2 Printing With the MultiPASS L6000 Chapter 2When selecting or loading paper, please remember the following:m Attempting to print on damp, curled, wrinkled, or torn paper cancause paper jams and poor print quality.m Use cut-sheet paper only. You cannot use multipart paper.m Highly textured or extremely smooth or shiny paper does notprint well.m The laser printing process uses high temperatures to fuse toner to thepaper. Use paper that will not melt, vaporize, discolor, or emitdangerous fumes at temperatures near 338°F (170°C). For example, donot use vellum paper in a laser printer. Make sure any letterhead orcolored paper you use can withstand high temperatures.m Make sure the paper is free of dust, lint, and oil stains.m To keep the paper from curling, do not open paper packs until you areready to use the paper. Store unused paper from opened packs in acool, dry location in the original packaging.m Your MultiPASS is factory-set to use letter-size paper. Whenever youchange the size of the paper loaded in the MultiPASS, you must alsoset the MultiPASS Printer Driver to the new size.m Do not use thicker paper than meets the specifications for this printer.See Appendix A for details.m Do not print on both sides of the paper. This may cause several sheetsto feed at one time.Installing a Printer DriverBefore you can use any type of printer with your computer, you mustinstall a printer driver. The printer driver tells the computer what kind of aprinter you are using. The printer driver also controls the various settings,such as print quality and paper type. You define these settings within theprinter driver, and the printer driver then communicates the settings toboth the computer and the printer.You must install the MultiPASS Printer Driver and the MultiPASSDesktop Manager for Windows 95 before you can use the MultiPASSL6000 as a printer for your computer. See your Quick Start Guide fordetails on how to install this software.
