Chapter 10 Troubleshooting 10-27TroubleshootingUsing Switch BoxesCanon does not recommend using a switch box with the MultiPASS. Touse more than one printer, it’s a good idea to add a second parallel port toyour computer.If the Power Goes OutIf power to the MultiPASS L6000 is cut off, any documents stored in itsfax memory will be lost. (The MultiPASS automatically prints a list of thelost documents when power is restored.) Because of this, be sure to printdocuments stored in memory or resend them as soon as possible.While the power is out, the MultiPASS will receive telephone calls if atelephone is attached. However, you cannot make calls (unless you areusing a cordless phone) or send or receive faxes.Avoid unplugging the MultiPASS unless absolutely necessary. This is thesame as a power outage.Memory Clear ReportThe Memory Clear Report summarizes the documents that were clearedfrom memory when a power failure occurred. This report is generatedautomatically.m If you experience a power failure, any documents stored in memorywill be lost.m When you turn on the MultiPASS after power is restored, theMultiPASS automatically prints out a list of documents that werestored in the memory at the time of the power failure.
