H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 99 page image

91By default, fragmentation is disabled on the MFR bundle.Examples# Enable fragmentation on interface MFR 6/1/12. system-view[Sysname] interface MFR 6/1/12[Sysname-MFR6/1/12] mfr fragmentmfr fragment-sizeSyntaxmfr fragment-size bytesundo mfr fragment-sizeViewMFR interface viewDefault level2: System levelParametersbytes: Fragment size, ranging from 60 to 1,500 in bytes. The fragment size that actually takes effect canonly be one of these values: 128, 256, and 512.DescriptionUse the mfr fragment-size command to configure the maximum fragment size allowed on a frame relaybundle link.Use the undo mfr fragment-size command to restore the default.By default, the maximum fragment size allowed on a frame relay bundle link is of 300 bytes.Examples# Configure the maximum fragment size allowed on interface MFR 6/1/12 to be 128 bytes. system-view[Sysname] interface MFR 6/1/12[Sysname-MFR6/1/12] mfr fragment-size 128mfr link-nameSyntaxmfr link-name [ name ]undo mfr link-nameViewFrame relay interface viewDefault level2: System levelParametersname: Name of a bundle link identification, which is a string of 1 to 49 characters.