H3C SR8800 IM-FW-II Manual

Also see for SR8800 IM-FW-II: Configuration guide Command reference

H3C SR8800 IM-FW-II Manual Manual pdf 1 page image

Manual version: 6PW101-20141219 BOM: 3123A0CSiH3C SR8800 IM-FW-II Card Manual1 Card identifierThe card identifier IM-FW-II is at the upper right corner of the front panel.2 IntroductionThe IM-FW-II card provides one console port, one CF card interface, two USB interfaces, two10/100/1000BASE-T Ethernet copper interfaces, and two Gigabit Combo interfaces.You can use a GE port or combo interface to provide the following functions:• In-band management.• Outgoing interface for log messages.• Failover interface for stateful failover.3 SpecificationsFigure 1 Front panel(1) CF card eject button (2) CF card slot (CF CARD) (3) CF LED (CFS)(4) Console port (CONSOLE) (5) USB interface 1 (reserved) (6) USB interface 2 (reserved)(7) Management Ethernet interface 1(10/100/1000BASE-T)(8) Management Ethernet interface2 (10/100/1000BASE-T)(9) Management Ethernetinterface 1 LED (LINK)(10) Management Ethernet interface 1LED (ACT)(11) Management Ethernet interface2 LED (LINK)(12) Management Ethernetinterface 2 LED (ACT)(13) Management interface 3(Electrical port of combo interface10/100/1000BASE-T)(14) Management interface 4(Electrical port of combo interface10/100/1000BASE-T)(15) Management interface 3(Optical port of combointerface 1000BASE-X)(16) Management interface 4 (Opticalport of combo interface 1000BASE-X)(17) Management interface 3 LED(LINK)(18) Management interface 3LED (ACT)(19) Management interface 4 LED(LINK)(20) Management interface 4 LED(ACT)(21) Ejector lever(22) Captive screw1 2 3 4 56789101112131415161718192021 22

/ 5

Related manuals for H3C SR8800 IM-FW-II