5Field DescriptionState PVC state100.11.1.1 Protocol addressvlink 327752 Virtual link numberdisplay atm pvc-infoSyntaxdisplay atm pvc-info [ interface atm { interface-number | interface-number.subnumber } [ pvc { pvc-name[ vpi/vci ] | vpi/vci } ] ] [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-number: Specifies the number of an ATM main interface.interface-number.subnumber: Number of an ATM subinterface, in the range of 0 to 1023.interface-number is the number of the ATM main interface.pvc-name: PVC name, a unique case-insensitive string of 1 to 16 characters on the specified ATMinterface. The name cannot be the same as any valid VPI/VCI pair. For example, the name 1/32 is notallowed.vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0 to 255. VCI is shortfor virtual channel identifier; its value ranges from 0 to 1023. As VCIs from 0 to 31 are reserved forspecial purposes, do not use them in normal cases.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display atm pvc-info command to display information about PVCs for the specified ATM maininterface, subinterface, PVC, or all ATM interfaces if no ATM interface is specified.Examples# Display the PVC information on all ATM interfaces. display atm pvc-infoVPI/VCI | STATE | PVC-NAME | INDEX | ENCAP | PROT | INTERFACE--------|---------|-----------|--------|--------|------|----------1/32 |UP |toBeijing |0 |SNAP |IP |Atm3/1/1 (UP)1/33 |UP |toShanghai |1 |SNAP |None |Atm3/1/1 (UP)