H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 75 page image

67regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display fr map-info command to display all frame relay address mappings or the one for thespecified frame relay interface.This command displays whether the static address map entries are correct and whether dynamic addressmapping operates properly.Related commands: fr map ip and fr inarp.Examples# Display the frame relay address map table. display fr map-infoMap Statistics for interface Serial4/1/8:10(DTE)DLCI = 100, IP INARP 100.100.1.1, Serial4/1/8:10create time = 2010/10/21 14:48:44, status = ACTIVEencapsulation = ietf, vlink = 14, broadcastDLCI = 200, IP INARP 100.100.1.1, Serial4/1/8:10create time = 2010/10/21 14:34:42, status = ACTIVEencapsulation = ietf, vlink = 0, broadcastDLCI = 300, IP 1.1.1.1, Serial4/1/8:10create time = 2010/10/21 15:03:35, status = ACTIVEencapsulation = ietf, vlink = 15Table 14 Output descriptionField DescriptionMap Statistics for interfaceSerial4/1/8:10(DTE)Display frame relay address mappings. The interface operates in DTEmode.DLCI = 100, IP INARP100.100.1.1, Serial4/1/8:10The PVC with DLCI 100 is mapped to remote IP address 100.100.1.1through InARP. The PVC is configured on interface Serial 4/1/8:10. Ifthe INAPP field is not displayed, it means the address mapping ismanually configured.create time = 2010/10/2114:48:44 Time and date when the map entry was created.status = ACTIVE State of the map entry.encapsulation = ietf Encapsulation is set to IETF.vlinkValue of the route-to-frame relay address mapping. A value of 0 indicatesthat the route is invalid, and a non-zero value means that the route isvalid. According to the value, the router can look up the mapcorresponding to the route, and get the DLCI.broadcast Broadcasts are permitted.display fr pvc-infoSyntaxdisplay fr pvc-info [ interface interface-type { interface-number | interface-number.subnumber } ][ dlci-number ] [ | { begin | exclude | include } regular-expression ]