H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 73 page image

65Table 12 Output descriptionField DescriptionSerial4/1/8:10 Frame relay interface (or subinterface) namemulti-point Interface or subinterface typeDCE Terminal typephysical up Physical layer stateprotocol up Link layer statedisplay fr lmi-infoSyntaxdisplay fr lmi-info [ interface interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface interface-type interface-number: Specifies an interface by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display fr lmi-info command to display the Local Management Interface (LMI) frame statistics ofthe specified or all frame relay interfaces.The LMI protocol maintains current frame relay links by sending Status-Enquiry messages and Statusresponse messages. The displayed information helps you diagnose faults.Examples# Display the statistics about LMI protocol frames. display fr lmi-infoFrame relay LMI statistics for interface Serial4/1/8:10(DTE, Q933)T391DTE = 10 (hold timer 10)N391DTE = 6, N392DTE = 3, N393DTE = 4out status enquiry = 96, in status = 85status timeout = 3, discarded messages = 3Frame relay LMI statistics for interface Serial4/1/10:10 (DCE, Q933)T392DCE = 15, N392DCE = 3, N393DCE = 4