H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 28 page image

20pvc max-numberSyntaxpvc max-number max-numberundo pvc max-numberViewATM main interface viewDefault level2: System levelParametersmax-number: Maximum number of PVCs allowed on an ATM interface, in the range of 1 to 1024.DescriptionUse the pvc max-number command to set the maximum number of PVCs allowed on the current ATMinterface.Use the undo pvc max-number command to restore the default.By default, the maximum number of PVCs allowed is 1024.The maximum number specified in this command is the total number of the PVCs that can be created onan ATM main interface and its subinterfaces.NOTE:The command is available only in ATM main interface view.Examples# Specify that interface ATM 3/1/1 support up to 128 PVCs. system-view[Sysname] interface Atm 3/1/1[Sysname-Atm3/1/1] pvc max-number 128reset atm interfaceSyntaxreset atm interface [ atm { interface-number | interface-number.subnumber } ]ViewUser viewDefault level2: System levelParametersinterface-number: Specifies the number of an ATM main interface.subnumber: Specifies the number of an ATM subinterface, in the range of 0 to 1023. It is separated fromthe main interface by a dot (.).