H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 72 page image

64Field DescriptionIn ARP request Received ARP requestsOut ARP reply Sent ARP repliesOut ARP request Sent ARP requestsIn ARP reply Received ARP repliesdisplay fr interfaceSyntaxdisplay fr interface [ interface-type { interface-number | interface-number.subnumber } ] [ | { begin |exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-type { interface-number | interface-number.subnumber }: Specifies an interface by its type andnumber. The interface-number argument is a main interface number. The subnumber argument is asubinterface number, in the range 0 to 1023.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display fr interface command to display information about the specified or all frame relayinterfaces.You can specify a main interface or a subinterface by providing the interface-type { interface-number |interface-number.subnumber } argument combination.Examples# Display information about all frame relay interfaces. display fr interfaceSerial4/1/8:10, multi-point, protocol up# Display information about a specified frame relay subinterface. display fr interface Serial3/1/3:0.100Serial3/1/3:0.100, point-to-point, DCE, physical up, protocol up