H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 71 page image

63Frame relay configuration commandsBasic frame relay configuration commandsdisplay fr inarp-infoSyntaxdisplay fr inarp-info [ interface interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface interface-type interface-number: Specifies an interface by its type and number. It can only be amain interface.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display fr inarp-info command to display statistics about frame relay inverse ARP (InARP) packets,including requests and replies, for the specified or all frame relay main interfaces.You may use this command to diagnose whether InARP is operating properly.Related commands: fr inarp.Examples# Display the statistics for frame relay InARP packets. display fr inarp-infoFrame relay InverseARP statistics for interface Serial4/1/8:10(DTE)In ARP request Out ARP reply Out ARP request In ARP reply0 0 1 1Table 11 Output descriptionField DescriptionFrame relay InverseARP statistics for interfaceSerial4/1/8:10(DTE)Display the statistics on frame relay InARP packets forthe interface