H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 45 page image

37restore their default settings. If your restoration attempt still fails, follow the error message to resolve theproblem.CAUTION:The default command might interrupt ongoing network services. Make sure you are fully aware of theimpacts of this command when you perform it on a live network.Examples# Restore the default setting for interface MP-group 2/1/3. system-view[Sysname] interface Mp-group 2/1/3[Sysname-Mp-group2/1/3] defaultThis command will restore the default settings. Continue? [Y/N]:ydescriptionSyntaxdescription textundo descriptionViewMP-group interface viewDefault level2: System levelParameterstext: Interface description, a case-sensitive character string of 1 to 80 characters.DescriptionUse the description command to set the description for the VT or MP-group interface.Use the undo description command to restore the default.By default, a MP-group interface is described in the form of interface name Interface, for example,Mp-group2/1/1 Interface.Examples# Set the description for interface MP-group 3 to mpgroup-interface. system-view[Sysname] interface Mp-group 2/1/3[Sysname-Mp-group2/1/3] description mpgroup-interfacedisplay interface mp-groupSyntaxdisplay interface mp-group mp-number [ brief ] [ | { begin | exclude | include } regular-expression ]display interface [ mp-group ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]ViewAny view