H3C SR8800 Command Reference Manual

Also see for SR8800 IM-FW-II: Configuration guide Manual

Contents

H3C SR8800 Command Reference Manual Manual pdf 15 page image

7Field DescriptionOAM ais-rdi countNumber of OAM AIS/RDI cells for the router to receive before reporting that thePVC is down; number of seconds for the router to wait before reporting that thePVC is up after the PVC has stopped receiving OAM AIS/RDI cells.input pkts: Count of received packets.input bytes: Count of received bytes.input pkt errors: Count of received error packets.output pkts Count of transmitted packets.output bytes Count of transmitted bytes.output pkt errors Count of transmitted error packets.Interface State Link layer protocol status of the interface.OAM State OAM status.PVC State PVC status.OAM cells received Count of received OAM cells.F5 InEndloop Count of received F5 loopback cells.F5 InAISCount of received AIS cells.If the AIS alarm state is not supported, this command displays only the count ofAIS cells, not the AIS alarm state, that is, the OAM AIS State field.F5 InRDICount of received RDI cells.If the RDI alarm state is not supported, this command displays only the count ofRDI cells, not the RDI alarm state, that is, the OAM RDI State field.OAM cells sent Count of transmitted OAM cells.F5 OutEndloop Count of transmitted F5 loopback cells.OAM AIS StateAID alarm state.If the AIS alarm state is supported, this command displays only the AIS alarmstate, not the count of received AIS cells, that is, the F5 InAIS field.OAM RDI State If the RDI alarm state is supported, this command displays only the RDI alarmstate, not the count of received RDI cells, that is, the F5 InRDI field.OAM cell drops Count of dropped OAM cells.OAM CC StateOAM CC alarm state:• A dash (–)—The system does not support obtaining OAM CC state.• No CC Alarm—No OAM CC alarm is present.• E2E CC Alarm—An end-to-end OAM CC alarm is present.• SEG CC Alarm—A segment OAM CC alarm is present (currently notsupported).display interface atmSyntaxdisplay interface atm [ interface-number | interface-number.subnumber ] [ | { begin | exclude | include }regular-expression ]