Paper jam."Lift the release lever."Cause Corrective ActionA paper jam occurredin the printer duringprinting.1. Lift the Release Lever and remove the jammed paper.(See "Clearing Jammed Roll Paper.") →P.852(See "Clearing a Jammed Sheet.") →P.8562. If "Not finished printing. Finish printing remaining jobs?" is shown on the DisplayScreen, press the OK button.Printing will resume, starting from the page on which the error occurred."Manually rewind the roll all the way and press OK."Cause Corrective ActionA paper jam occurredwhen advancing the pa-per.1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the DisplayScreen, press the OK button.Printing will resume, starting from the page on which the error occurred.Paper loaded askew.Cause Corrective ActionPaper is loaded askew. Follow these steps to reload the roll.1. Lift the Release Lever.2. Open the Top Cover.3. Adjust the right edge of the roll to make it parallel to theright Paper Alignment Line.4. Lower the Release Lever.5. Close the Top Cover.(See "Loading Rolls in the Printer.") →P.628If this error recurs after you reload the roll, remove the RollHolder from the printer, push the roll firmly in until it touchesthe Roll Holder flange, and reload the Roll Holder in the print-er.(See "Attaching the Roll Holder to Rolls.") →P.623Follow these step to reload a sheet.1. Lift the Release Lever.2. Open the Top Cover.3. Adjust the right edge of the sheet to make it parallel to theright Paper Alignment Line and the trailing edge of thesheet to make it parallel to the paper alignment line underthe Paper Retainer.4. Lower the Release Lever.Error Message > Messages regarding paper >Paper jam. iPF81513900
