Setting DetailsVertical Prints the image and text created with the application software in the orientation asit is.Horizontal Prints the image and text by rotating sideways 90 degrees from the orientation asspecified in the application.Roll Paper LengthSet the length of one page to print on roll paper.When you place a checkmark on Auto Settings, the one-page length to be printed on roll paper is automatically set so thatthe laid-out objects are printed on one page.Note• Available only if rolls are selected in Paper Source.• You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).• You can change the numbers by clicking either ▲ button or ▼ button.OrderSet the object layout order.The following settings are available for order.Setting DetailsUpper Left to Right The objects are laid out from upper left to right.Upper Left to Bottom The objects are laid out from upper left to bottom.Note• When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Vertical, you canchoose only Upper Left to Right.• When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Horizontal, you canchoose only Upper Left to Bottom.Paper SizeYou can select the size of the print media.Note• You cannot display this if Roll Paper is selected in Paper Source.Zoom Dialog BoxThis dialog box appears when you select Zoom from the View menu. You can enlarge or reduce the screen display.Mac OS X Software > Free Layout >Zoom Dialog Box iPF8155502
