Setting Item Description, InstructionsTest Print Choose Paper Details to print the paper settings as specified in Paper Details.Choose Print Job Log to print a record of print jobs, including the paper type and size,amount of ink used, and so on. (Information on ink consumption is general, not specificin nature.)Choose Menu Map to print a list of the main menu options.Choose Nozzle Check to print a test pattern for checking the nozzles.Select Color Palette to print the GL2 color palette.Information Displays printer information and an error log. (See " Information .") →P.734Paper MenuSetting Item Description, InstructionsCut Sheet Type (*1 →P.724 ) Choose the type of sheets.(See "Selecting the Paper Type (Sheet).") →P.650Roll Media Type (*1 →P.724 ) Choose the type of roll.(See "Selecting the Paper Type (Roll).") →P.632Roll Length Set Displayed if ManageRemainRoll is On.If a barcode is not printed on rolls, specify the roll length.The roll length is displayed in meters or feet, dependingon the setting in Length Unit.ManageRemainRoll Choose On to print a barcode at the end of a roll beforeyou remove it. The printed barcode can be used in manag-ing the amount of roll paper left. Choose Off if you prefernot to print the barcode.(See "Keeping Track of the Amount of Roll PaperLeft.") →P.639*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types ofPaper.") →P.617 The types of paper indicated in the printer driver and related software (as well as on theControl Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-date paper information by using the Media Configuration Tool. See Media Configuration Tool →P.406 orMedia Configuration Tool →P.539 .Paper DetailsSetting Item Description, Instructions(The type of paper is dis-played here.)(*1 →P.726 )Roll DryingTime Specify the time to wait for the ink to dry for each sheet.Scan Wait Time Specify the time to wait for the ink to dry between eachscan (after the printhead finishes moving in one direction),in consideration of how quickly the ink dries. Also specifythe applicable area for the ink drying time. Select Entirearea to apply the ink drying time after each scan until thedocument is fully printed. Select Leading edge to applythe ink drying time after each scan only in the area 110–160 mm from the leading edge. (The applicable lengthvaries depending on the Print Quality setting.) Note thatprinting will take longer if you specify the Scan WaitTime setting. In particular, when Leading edge is selec-ted, colors may be uneven in the boundary between theareas with and without a drying time.Printer Parts > Control Panel >Main Menu Settings iPF8159724
