System SetupSetting Item Description, InstructionsWarning Buzzer Set the buzzer. Choose On for the buzzer to sound oncefor warnings and three times for errors.Detect Mismatch Choose Warning for notification (display of a warningmessage) during printing if the paper type specified in theprinter menu does not match the paper type in the printerdriver. Choose None to continue to print without notifica-tion. Choose Pause to have printing paused under thesecircumstances. In this case, you can continue printing bypressing the Online button.Skip Take-Up Err Choose On to continue with printing even if an error oc-curs with the Media Take-up Unit. Choose Off to have theprinter pause before printing if a rewinding error occurs.Keep Paper Size Choose On to use the paper size setting as the basis forprinting instead of other settings. The margin setting of theprinter menu will be used instead of the margin setting ofthe printer driver if the latter is smaller, which may pre-vent text or images in the margin from being printed.Choose Off to use the printer driver settings instead. Evenif the margin setting of the printer driver is smaller thanthat of the printer menu, text or images will not be cut off.However, this requires longer paper because the actualmargin will be equal to the margin setting of the printerdriver plus the margin setting of the printer menu.Paper Size Basis Sht Selection 1 If sheet size detection is activated, choose whether ISOA3+ or 13"x19"(Super B) is applied when an intermedi-ate size is detected.Sht Selection 2 If sheet size detection is activated, choose whether ISOB1 or 28"x40" (ANSI F) is applied when an intermediatesize is detected.Printer Parts > Control Panel >Main Menu Settings iPF8159732
