Note• Use Manual Band Adj for transparent media or other paper for which adjustment with Auto Band Adj. isnot possible.• Either B:Standard/Draft or A:High in the Adjust Length menu is applied, depending on printer driver set-tings at the time of printing.• If you have selected Easy Settings in the printer driver, follow these steps to confirm the Print Prioritysetting.• Windows: Click View Settings on the Main tab to display the View Settings dialog box.• Mac OS X: Click View set. on the Main pane to display the View settings dialog box.Follow these steps to change the Feed Priority setting.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button.3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button.4. Press ▲ or ▼ to select Feed Priority, and then press the ▶ button.5. Press ▲ or ▼ to select Automatic, Band Joint or Print Length and then press the OK button.Auto Band Adjustment (Auto Band Adj.)If printed images are affected by banding in different colors, adjust the amount that paper is fed.Auto Band Adj. offers two modes, Standard Adj. and Advanced Adj.. Use Advanced Adj. if Standard Adj. does noteliminate banding, or when using paper other than genuine Canon paper or paper for purposes other than checking output.Always check the Feed Priority setting before using Auto Band Adj.. (See "Selecting a Feed Amount AdjustmentMethod (Feed Priority).") →P.676Note• When using highly transparent media not compatible with Auto Band Adj., you must adjust the feed amountmanually. (See "Manual Band Adjustment (Manual Band Adj).") →P.678• If additional fine-tuning is necessary after Auto Band Adj., use Fine Band Adj.. (See "Banding Adjust-ment During Printing (Fine Band Adj.).") →P.680• To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactlythe right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feedamount. (See "Adjusting Line Length (Adjust Length).") →P.681• This may take some time, depending on the type of paper.• Use paper of the same type and size for adjustment as you will use for printing.Adjustments for Better Print Quality > Adjusting the feed amount >iPF815 Auto Band Adjustment (Auto Band Adj.)8677
