2. Press ▲ or ▼ to select Media Menu, and then press the ▶ button.3. Press ▲ or ▼ to select Roll Media Type, and then press the ▶ button.4. Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.Note• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.") →P.617 Bydefault, Plain Paper is selected.• If you move the Release Lever, the setting automatically reverts to the previously selected paper.• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may causefeed errors and affect printing quality.• If automatic monitoring of the remaining roll is deactivated ( Off is selected) and you have selected atype of paper for which width detection is deactivated ( Off is selected), you must advance the papermanually to the position for printing. (See "Manually Loading Paper to the Position for Printing.")→P.6545. Press the Online button to bring the printer online.Specifying the Paper Length (Roll)When changing the length of paper after the paper has been advanced, specify the length as follows.Note• When you specify the roll length in the printer menu, ManageRemainRoll must be set to On.• After you select the type of roll, the printer automatically shows a menu for selection of the roll length on theDisplay Screen if no barcode has been printed on the roll and you have set ManageRemainRoll to On. Se-lect the roll length, and then press the OK button. The printer will automatically go online.1. Press the Menu button to display MAIN MENU.Handling Paper > Handling rolls >iPF815 Specifying the Paper Length (Roll)7633
