Canon imagePROGRAF iPF815 User Manual

Also see for imagePROGRAF iPF815: Technical documents Brochure Basic guide Basic guide Basic guide

Contents

Canon imagePROGRAF iPF815 User Manual Manual pdf 789 page image

• Example of a Macintosh networkIn Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour (Zeroconf) functions.Note• The imagePROGRAF printer driver is not compatible with AppleTalk.• Example of a NetWare networkNote• Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/IP or AppleTalk. In this case, complete the settings for each protocol you will use.Configuring the IP Address on the PrinterYou must configure the printer's IP address before using the printer in a TCP/IP network.The printer's IP address is configured automatically when you install the printer driver following the instructions in the Set-up Guide.Configure the IP address by using imagePROGRAF Device Setup Utility, the printer Control Panel, or ARP or PING com-mands, if the IP address is changed, or if you change the printer connection mode to a network connection. For details onconfiguring the IP address, refer to the following topics.• Configuring the IP Address Using imagePROGRAF Device Setup Utility →P.404 (Windows)• Configuring the IP Address Using the Printer Control Panel →P.774• Configuring the IP Address Using ARP and PING Commands →P.775Network Setting > Network Setting >iPF815 Configuring the IP Address on the Printer10773