Item Details Default SettingIPP Printer URI When using a standard Windows port for IPP printing, enter anURL less than 255 bytes for all characters for http://"IP ad-dress"/IPP-URI.printerRAW Printing Activate this setting to use Raw Printing. OnRAW Mode Bi-di-rectionActivate this setting to use Raw mode bidirectional communica-tion.OffFTP Printing Activate this setting to use FTP Printing. OnSMTP Server Ad-dressSpecify the SMTP server's IP address. 0.0.0.0Primary DNS Serv-er AddressSpecify the IP address of the primary DNS server. 0.0.0.0Secondary DNSServer AddressSpecify the IP address of the secondary DNS server. 0.0.0.0DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-ters). Use single-byte letters, numbers, and - (hyphens). Do not usenumbers or - for the first character or - for the last character.NB-17FBxxxxxxxxxxxxDNS Domain Name Specify the printer domain name, up to 63 characters. Use single-byte letters, numbers, - (hyphens), and . (periods). Do not usenumbers, -, or . for the first character, or - or . for the last charac-ter.blankMulticast DNSService NameSpecify the printer's Multicast DNS service name. (1–63 charac-ters)This name will be displayed when Bonjour functions are used.Canon iPFxxxx (xxxxxx)7. Click OK to display the Network page.Note• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that sup-ports such protocol running in the network.• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by thismethod is used first. If you cannot obtain the IP address, the address specified in IP Address is used.• It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommend clear-ing check boxes of options you will not use.• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-ers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS ServerAddress, DNS Host Name, and DNS Domain Name, respectively.Specifying Printer-Related InformationFollow the steps below to specify device information and security settings.1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUIpage.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.Network Setting > Network Setting >Specifying Printer-Related Information iPF81510778
