Cannot print over a NetWare networkCause Corrective ActionThe printer's NetWare set-tings are not configuredcorrectly.Make sure the printer's NetWare settings are configured correctly. In particular, makesure a valid frame type is selected.(See "Configuring the Printer's NetWare Network Settings.") →P.784The computer you are try-ing to print from is not con-figured correctly.Make sure the computer's NetWare settings are configured correctly.(See "Configuring NetWare Network Settings.") →P.791The NetWare server andservices are not configuredcorrectly.Check the following points.1. Make sure the NetWare file server is running.2. Make sure there is enough free disk space on the NetWare file server. Insufficientdisk space may prevent you from processing large print jobs.3. Start NWADMIN or PCONSOLE and confirm that the print service is configuredcorrectly and the print queue is available.4. If data transmission to a printer on another subnet fails, deactivate NCP burst mode inthat printer's network protocol settings.5. If the printer is used in queue server mode, specify Other/Unknown as the printertype.Cannot print over AppleTalk or Bonjour networksCause Corrective ActionThe AppleTalk protocol is notenabled on the printer.Activate AppleTalk on the printer.(See "Configuring the Printer's AppleTalk Network Settings.") →P.793The computer you are trying toprint from is not configured cor-rectly.Make sure the computer's AppleTalk settings are configured correctly.(See "Configuring the Destination for AppleTalk Networks .") →P.794(See "Configuring the Destination for Bonjour Network .") →P.800The computer and printer are noton the same network.Due to the nature of Bonjour, you cannot print if the printer is on another networkbehind a router. Make sure the computer and printer are on the same network. Forinformation about network settings, ask your network administrator.Troubleshooting > Cannot print over a network >iPF815 Cannot print over a NetWare network12879
