Canon imagePROGRAF iPF815 User Manual

Also see for imagePROGRAF iPF815: Technical documents Brochure Basic guide Basic guide Basic guide

Contents

Canon imagePROGRAF iPF815 User Manual Manual pdf 877 page image

Cannot Load SheetsCause Corrective ActionThe paper source selection is incorrect. Press the Feeder Selection button to activate the Cut Sheet lamp.Paper is not cut straightCause Corrective ActionThe paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.Paper rises by the ends of the cut position before it is cut. Reload the paper correctly.Paper is not cutCause Corrective ActionIn the printer driver, No or Print Cut Guidelineis specified in Auto Cut.Specify Yes in Auto Cut in the printer driver.In MAIN MENU, Eject or Manual is specifiedin Cutting Mode.Specify Automatic in Cutting Mode in MAIN MENU.Rolls are not cut when you are using the MediaTake-up Unit.Either execute Paper Cutting in the Control Panel or lift the Re-lease Lever and cut the roll with scissors.(See "Removing Printed Documents from the Media Take-upUnit.") →P.761The Media Take-up Unit Continues RotatingCause Corrective ActionThere is a foreign object in the path of the Media Take-up Sensor (indicatedby a dotted line).Remove the foreign object from theMedia Take-up Sensor path. Arrangethe Basket Cloth and Basket Rod sothey do not interfere with the MediaTake-up Sensor.Troubleshooting > Problems Regarding Paper >iPF815 Cannot Load Sheets12861