3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pagesand D Between Scans in B Drying Time, and then click OK.(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.438Note• By factory default, Drying Time is deactivated ( Off ) for all paper types.• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Modeto Eject in the printer menu.(See "Specifying the Cutting Method for Rolls.") →P.642Specifying the Cutting Method for RollsHow a roll is cut after ejection varies depending on the printer settings.Cutting Method Menu Settings Driver SettingAutomatic The roll is automatically cut by the Cutter Unitfollowing printer driver settings.CuttingModeAutomat-icAuto Cut YesEject→P.643Choose this setting if you prefer not to havedocuments dropped immediately after printing,as when waiting for ink to dry.To cut the roll using the Cutter Unit, hold downthe Stop button for a second or more.Eject YesMan-ual→P.644Choose this setting when using media that can-not be cut using the Cutter Unit.Cut each page from the roll using scissors. Forcontinuous printing (if you will cut each pagelater), in Auto Cut, select Yes, or select PrintCut Guideline.Manual No YesPrint CutGuidelineHandling Paper > Handling rolls >Specifying the Cutting Method for Rolls iPF8157642
