The contrast becomes uneven during printingCause Corrective ActionThe paper feed amount is out of adjust-ment.Adjust the feed amount.(See "Adjusting the Feed Amount.") →P.676The type of paper specified in the printerdriver does not match the type loaded inthe printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.628(See "Loading Sheets in the Printer.") →P.651Make sure the same type of paper is specified in the printer driver as youhave loaded in the printer.1. Hold down the Stop button for a second or more to cancel printing.2. Change the type of paper in the printer driver and try printing again.The length of printed images is inaccurateCause Corrective ActionIn the printer menu, Band Joint isspecified in Feed Priority.To ensure the feed amount matches the paper size, select Print Length in FeedPriority in the printer menu and enter the amount for adjustment in AdjustLength.(See "Adjusting the Feed Amount.") →P.676You can adjust the feed amount in 0.02% increments.(See "Main Menu Settings.") →P.722The type of paper specified in theprinter driver does not match thetype loaded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.628(See "Loading Sheets in the Printer.") →P.651Make sure the same type of paper is specified in the printer driver as you haveloaded in the printer.1. Hold down the Stop button for a second or more to cancel printing.2. Change the type of paper in the printer driver and try printing again.Documents are printed crookedCause Corrective ActionSkew Skew Check Lv. has been set to Loose or Off. Choose Standard in Skew Check Lv..Width Detection has been set to Off. Choose On in Width Detection.Documents are printed in monochromeCause Corrective ActionIn the Advanced Settings of the printer driver,Monochrome, Monochrome (BK ink), orMonochrome Bitmap is specified in ColorMode.In the Advanced Settings of the printer driver, specify Color inColor Mode and try printing again.Troubleshooting > Problems with the printing quality >iPF815 The contrast becomes uneven during printing12875
