The following settings are available for the finished size.Setting DetailsFit Roll Paper Width Prints by automatically enlarging or reducing the entire document so that the widthof the document matches the roll paper width.Specify Folded Size Prints by automatically enlarging or reducing the entire document to match the sizeof the paper. Select the actual size of the paper you want to print on in Fit PaperSize.Rotate Page 90 degrees (Con-serve Paper)Prints by rotating pages by 90 degrees. Pages are automatically rotated if they willfit within the roll paper width when rotated, and are not rotated if they will not fitwithin the roll paper width.Binding Settings Dialog BoxThis is displayed when you select Binding Settings from the Edit menu. This allows you to configure the binding edgesettings.Binding EdgeConfigures the binding edge when folding paper.The following settings are available for the binding edge.Setting DetailsBottom Prints by placing the binding margin (gutter) at the bottom of the document.Top Prints by placing the binding margin (gutter) at the top of the document.BindingConfigures the binding margin (gutter).Prints by creating a binding margin (gutter) of the specified size. Enter the margin size as a number.Note• The values that can be entered are 0 to 50 (mm).Windows Software > Free Layout >iPF815 Binding Settings Dialog Box4283
