Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 97 page image

975. Move the cursor to the position to be edited in thesearch editing area by pressing the A, or B button.6. Select the desired digit or month by pressing the + or- button.7. Repeat procedures 5 and 6 to edit the other positions.8. Press the PLAY/PAUSE button to start the search.A list of records including the most recent recording willappear on the monitor.9. Rotate the JogDial clockwise or counterclockwise tomove the cursor to the record to be stored on the disk.Multiple records can be selected for storing as shownbelow.• Select a record on the table by rotating the JogDial,then press the SET button.• Select the next record on the table by rotating theJogDial.The records placed between can be selected for stor-ing by executing the following procedure.10. Press the COPY button to start copying.The display "COPYING" appears on the lower-left cor-ner in the menu.11. When the copying is completed the display "COPYDONE!" appears in the menu.12. To quit copying, press the STOP button to exit from themenu.The recorded images in the Disk Recorder can be storedon the DVD-RAM disk by copying the selected recordswhen the system is equipped with the DVD Extension Unit.Notes:• This function is only available when the optionalDVD Drive Unit (procured locally) is connected tothe COPY port on the rear of the Disk Recorder.• It is recommended to backup the recorded data incase of a malfunction or accident.Follow the procedures described below to copy to theDVD-RAM disk.1. Select the group to be played back by pressing theGROUP SELECT button.2. Pressing the ALARM SEARCH button toggles the indi-cator in the button on and off.Selecting either mode will display the list as shownbelow.On: Displays only the Alarm and Emergency RecordList of the selected group.Off: Displays all Record Lists for the selected group.3. Press the INDEX button to display the list selected onthe Multiscreen Monitor as shown below.Pressing the INDEX button will toggle the windowbetween List and Thumbnail search.The backup function is enabled only the list table is dis-played on the monitor.Note: The displayed list can be switched to the select-ed group by pressing the GROUP SELECT button.4. Press the DISPLAY button to display the record list withthe search (SEARCH) editing area as shown in the fig-ure.BACKUP FUNCTIONINDEXSearch Editing Area• Record List000010009DATE MAY29.00NO G2G123:59:59 T/L22:15:40 M/S ALM-TRM12O/S ALM-VMD3T/LT/L ALM-TRM1M/S ALM-PC4T/L EMRT/L MAN(TOTAL 2343RECORD)21:00:0717:33:057:23:116:59:448:55:280:01:28G3G4G3000010008000010007000010006000010005000010004000010003000010002GROUP TIME REC-MODEALL GROUPMAY29.00SEARCH: 0:01 G1SEL:←→ CHG:+– EXE:SET ESC:FSTOPALARM # SEARCH:[DISPLAY]ALLALLALLDISPLAYCOPYCOPYING MAY29.00 000003PLAY:B ESC:FSTOP SEL:JOGSEARCH:DISPLAY000010009DATE MAY29.00NO G2G123:59:59 T/L22:15:40 M/S ALM-TRM12O/S ALM-VMD3T/LT/L ALM-TRM1M/S ALM-PC4T/L EMRT/L MAN(TOTAL 2343RECORD)21:00:0717:33:057:23:116:59:448:55:280:01:28G3G4G3000010008000010007000010006000010005000010004000010003000010002GROUP TIME REC-MODEALL GROUPALLALLALLCOPY DONE! LEFT:20%PLAY:B ESC:FSTOP SEL:JOGSEARCH:DISPLAY000010009DATE MAY29.00NO G2G123:59:59 T/L22:15:40 M/S ALM-TRM12O/S ALM-VMD3T/LT/L ALM-TRM1M/S ALM-PC4T/L EMRT/L MAN(TOTAL 2343RECORD)21:00:0717:33:057:23:116:59:448:55:280:01:28G3G4G3000010008000010007000010006000010005000010004000010003000010002GROUP TIME REC-MODEALL GROUPALLALLALL