Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 53 page image

53• “FPS” indicates as field per second or frame persecond when the FIELD/FRAME parameter is set toFIELD or FRAME in the menu.Move the cursor to the REC QUALITY parameter bypressing the D or C button, then select a recordingimage quality by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)NORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended time recording quality(Compression Rate 1/25) Alarm Active ModeThe item lets you select the active mode for group camerasin Time Lapse Recording when an alarm is received whilerecording with the internal programmed timer.1. Move the cursor to the TRIGGER ACTION parameter inthe menu by pressing the D or C button.2. Select the desired active mode for assigned groupcameras by pressing the + or - button.REC+ALM: Enables alarm recording and alarm activa-tion.REC: Enables only alarm recording.The ALARM display on the monitor is disabled.OFF: Deactivates alarm input.The ALARM display on the monitor is also disabled.The factory default setting is REC+ALM. Event RecordingThese items let you set the recording mode in Time LapseRecording when an alarm is received during the recordingwith the internal programmed timer.1. Move the cursor to the EVENT REC MODE parameterby pressing the D or C button, then select a recordingtime mode by pressing the + or - button.The parameters are the same as TIMER REC MODEexcept OFF.For details refer to TIMER REC MODE in this menu.2. Move the cursor to the REC RATE(MAX) parameter bypressing the D or C button, then select a recordingrate by pressing the + or - button.For details refer to REC RATE in this menu.3. Move the cursor to the REC QUALITY parameter bypressing the D or C button, then select a recordingimage quality by pressing the + or - button.For details refer to REC QUALITY in this menu.4. Move the cursor to the DURATION parameter by press-ing the D or C button, then select the alarm recordingduration by pressing the + or - button.2S - 6M: Enables alarm recording for between 2 sec-onds and 6 minutes.MANUAL: Enables alarm recording while the alarm sig-nal is received from the ALARM port.CONTINUE: Enables alarm recording until the RECSTOP is pressed.The factory default setting is 10S.5. Move the cursor to the DYNAMIC REC parameter bypressing the D or C button, then select an alarmrecording pattern by pressing the + or - button.OFF: Records the images assigned to the group inputsincluding the one which has activated the alarm.ALM-PRI: Records the alarm input images preferential-ly over other video inputs.ALM-ONLY: Records the particular images that haveactivated the alarm.ALM-MILUTI: Records multiple alarms adaptively.The factory default setting is OFF.6. If the parameter ALM-MULTI is selected for alarmrecording pattern, move the cursor to the RECRATE(BASE) parameter by pressing the D or C button,then select a recording rate by pressing the + or -button.The recording rate can be selected as same as RECRATE(MAX) maximally.7. Move the cursor to the AUTO COPY parameter bypressing the D or C button, then select alarm backupmode by pressing the + or - button.This lets you enable or disable alarm data backup onthe DVD-RAM disk. Refer to the DVD DRIVE SETUP fordetails.OFF: Disables alarm data backup.ON: Enables alarm data backup.The factory default setting is OFF.8. Press the SETUP/ESC button to return to the previousprogram number menu.