1013. Select the ALL or OPERATION password (5-digit) bypressing the Numeric buttons (1 - 10).• To select “0” for numeric input, press the numeric 10button.• Entering input will automatically verify a password.If the password is not correct, “PASSWORD ERROR!” isdisplayed on the monitor screen and returns to the step2 display.To try to enter password again, repeat procedures 3.• To quit entering password, press the SETUP/ESC but-ton.4. If the password is correct, “KEY UNLOCKED!” is dis-played on the monitor screen for about two secondsand returns to the normal view.The indicator in the LOCK button is off.Note: It will be locked automatically, if no operationtakes place within five minutes.To enter the ALL password after entering OPERATIONpassword on step 3, follow the procedure below.1. Press the LOCK button for two seconds or more to lockthe system.2. Repeat the procedure from the step 2 by pressing theLOCK button.BUTTON LOCKED FUNCTIONThe system setup and operations can be password protect-ed to prevent malfunction of the system due to accidentalerasure of data, alteration of settings or erroneous opera-tions by unauthorized persons.There are two passwords shown below corresponding to alimit of operations.ALL: Both normal operations and setup operations areallowed.OPERATION: Normal operations are allowed.Note: The button locked function is disabled even theLOCK button is pressed while the status shown below.• Being played back the images.• The setup menu is displayed on the monitor screen.• The recorded list or thumbnail is displayed on the moni-tor screen.The described below are procedure to lock and releaselocked.1. Press the LOCK button for two seconds or more toapply the button locked function.“KEY LOCK DONE!” display will appear on theMultiscreen Monitor for about two seconds.The indicator in the button lights to indicate the buttonlocked mode is selected.To release this function, follow the procedure below.2. Press the LOCK button for two seconds or more to dis-play the password inquiry window shown below on theMultiscreen Monitor.Note: The window will be closed automatically if noinput is made for about 30 seconds.LOCKPASSWORDB–––––LOCK