Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 57 page image

57 Sequence Setup (MultiscreenMonitor)There are three sequence patterns to run on theMultiscreen Monitor.The items shown below let you program the sequence torun on the Multiscreen Monitor. Live SequenceLive sequence is a series of 16 steps assigned to theMultiscreen Monitor.The sequence steps can be combined with four screensegments (quad) display. Live Sequence Pattern Setting1. Move the cursor to MULTI LIVE SEQUENCE SETUP inthe SEQUENCE SETUP menu by pressing the D or Cbutton, then press the SET button.The menu shown below appears on the monitor screen.2. Move the cursor to the step editing area by pressingthe A, B, D or C button.3. Select a camera to be displayed for CAM editing areaby pressing the + or - button.1 - 16: Displays the image of the selected camera num-ber.4A - 4D: Displays the assigned images in quad.Refer to the QUAD PATTERN SETUP for settings.--: Disables display and will skip automatically.4. Move the cursor to the PRESET editing area by press-ing the B button, then select a preset position to bedisplayed by pressing the + or - button, if applica-ble.1 - 64: Selects a preset position of the assigned cam-era.--: No preset positionThe factory default setting is --.These items let you determine functions such as sequenceand power on status for this Disk Recorder.1. Select MULTIPLEXER SETUP in the WJ-HD500 SETUPmenu by pressing the D or C button, then press theSET button.The MULTIPLEXER SETUP menu as shown belowappears on the monitor screen.2. Select an item or item parameter in the menu by press-ing the D or C button.3. To return to the WJ-HD500 SETUP menu, press theSETUP/ESC button.Sequence SetupThese items let you program the sequence pattern for theSpot and Multiscreen Monitor.1. Move the cursor to SEQUENCE SETUP in the MULTI-PLEXER SETUP menu by pressing the D or C button,then press the SET button.The SEQUENCE SETUP menu as shown below appearson the monitor screen.2. Select an item or item parameter in the SEQUENCESETUP menu by pressing the D or C button.3. To return to the previous MULTIPLEXER SETUP menu,press the SETUP/ESC button.5 MULTIPLEXER SETUPSEQUENCE SETUPPOWER ON MULTI OUTPUT QUAD-4ASPOT OUTPUT 1SECRET VIEW OFF5-1 SEQUENCE SETUPMULTI LIVE SEQUENCE SETUPQUAD SHIFT OFFQUAD PATTERN SETUPSEQ TIMING INTGROUP SEQ MODE QUADSEQ DWELL 2SAUTO SKIP ONSPOT LIVE SEQUENCE SETUPSEQ TIMING INTAUTO SKIP ON5-1-1 MULTI LIVE SEQUENCE SETUPPRE- PRE-STEP CAM SET SEC STEP CAM SET SEC1 4A -- 2S 9 -- -- 0S2 4B -- 2S 10 -- -- 0S3 4C -- 2S 11 -- -- 0S4 4D -- 2S 12 -- -- 0S5 -- -- 0S 13 -- -- 0S6 -- -- 0S 14 -- -- 0S7 -- -- 0S 15 -- -- 0S8 -- -- 0S 16 -- -- 0SMULTIPLEXER SETUP