Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 38 page image

38 Time Lapse RecordingThe Time Lapse Recording records freeze images at regular intervals until the end of the recording operation.• Manual and External (Power-on) Timer Recording is recorded in this mode on the Manual Recorder. Refer to the ManualRecording Setup for further details.• Emergency Recording is also recorded in this mode on the Emergency Recorder. Refer to the Emergency RecordingSetup for further details.• This recording mode is also available as Internal Timer Recording with the assigned program timer. Refer to the assignedprogram timer for further details.The Time Lapse Recording mode records images as shown below.Notes:• The thumbnail is based on an image as soon as the recorder starts recording.• The recording number is automatically assigned and renewed after 5 000 images.The thumbnail is also made with an image at that time. Multi Shot RecordingThe Multi Shot Recording is an event-recording function reacting to an alarm input when the recording timer is set to the inter-nal timer [INT].It records the number of images in pre- and post-recording.Pre-recording is the recorded images during standby, prior to the input of an alarm signal.Post-recording is the recorded images after the input of the alarm signal.The Multi Shot Recording mode is a setting that can be assigned with the program timer.The Multi Shot Recording mode records images on the Timer Recorder, corresponding to the alarm input signal, as shownbelow.For example, camera inputs 1, 2, 3 and 4 are assigned to a group.• Dynamic Recording is set to OFFRecords the assigned camera input in a specified number of pre- and post-recording when an alarm is received.C1 C2 C3 C4 C5 C6 C7 C8TStartThumbnailt tT TC1 C2 C3 C4 C2 C3 C4 C1 C2 C3 C4 C1 C4 C1 C2 C3Alarm 2 in Alarm 4 inThumbnailPre-recording Post-recordingThumbnailPre-recording Post-recording