Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 95 page image

95 Zooming Single Spot (Playback)While the image on the monitor screen is displayed inSingle Spot mode, the image can be zoomed following theprocedure below.1. Select an image to be zoomed on the monitor by press-ing a numeric button (1 - 16).The indicator in the selected button lights up and thecamera image corresponding to the button appears onthe monitor screen.2. Press the EL-ZOOM button to display the zoomedimage on the monitor.3. In the zoom mode, pressing the C, D, A, or B buttonwill move the image in the direction of the button.4. Pressing the + or - button will zoom the image asshown below.+: Increases zoom in steps (x2 → x4 → x8)-: Decreases zoom in steps (x8 → x4 → x2)5. To cancel this mode, press the EL-ZOOM button toreturn to the image previously shown. Display on the MonitorThe procedures described below are an example display-ing the playback on the Multiscreen Monitor. Single and Multiscreen Spot (Playback)1. Select the group to be played back by pressing theGROUP SELECT button.2. Pressing the PLAY/PAUSE button will play back themost recent recording in the forward direction.The selected group images appear with the minimumsegment screen on the monitor.(B) and recording number appear on the monitorscreen to indicate that playback is selected.Note: When the ALARM SEARCH button is on, the DiskRecorder plays back for alarm and emergencyrecording on the Hard Disk.3. Pressing the MULTISCREEN SELECT button will tog-gle the display with the segments as shown below.• Segments assigned to channels where no recordingtakes place appear blacked out.4. To display the image in single spot mode, select anumeric button (1 - 16) corresponding to the image tobe displayed.The selected image will be displayed on the monitor.2EL-ZOOMBPLAY/ PAUSEyMULTISCREENSELECTMinimum Screen Segment 416 13 10 9 7