Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 93 page image

93 Search Record FunctionThe Disk Recorder has two search functions.The procedures below describe how to search and playback records.1. Select the group to be played back by pressing theGROUP SELECT button.2. Pressing the ALARM SEARCH button toggles the indi-cator in the button on and off.Selecting either mode will display the list as shownbelow.On: Displays only the Alarm (REC+ALM) andEmergency Record List of the selected group.Off: Displays all Record Lists for the selected group.3. Press the INDEX button to display the list selected onthe Multiscreen Monitor as shown below.Pressing the INDEX button will toggle the windowbetween List and Thumbnail search.Notes:• The displayed list can be switched to the selectedgroup by pressing the GROUP SELECT button.• The display mode of the Record List can bechanged by pressing the ALARM SEARCH buttonas explained in 2. above.• If alarm and emergency records are selected whiledisplaying thumbnails, any thumbnails exceeding255 are blacked out on the screen.Thumbnails (up to 255) can be displayed bysearching according to the procedure describedbelow.• Jump searchThe recorded images can be searched by jumping tothe next recording from the currently selected recordnumber.During playback, rotate the JogDial clockwise or coun-terclockwise to move to the beginning of the nextrecord from the record number currently selected.After jumping to the next recording, the Disk Recorderresumes playback.Note: Confirm that the indicator in the ALARMSEARCH button is not lit by pressing the button.Clockwise: Jumps to the beginning of the next record-ing in a forward direction.Counterclockwise: Jumps to the beginning of the nextrecording in a backward direction.• Alarm jump searchThe recorded alarm images can be searched by jump-ing to the next alarm recording from the currentlyselected record while the ALARM SEARCH button ison.During playback, rotate the JogDial clockwise or coun-terclockwise to move to the beginning of the next alarmrecording from the record currently selected.After jumping to an alarm recording, the Disk Recorderresumes playback.Notes:• Confirm that the indicator in the ALARM SEARCHbutton is lit by pressing the button.• The recorded alarm images that the TRIGGERACTION is set to REC+ALM are only enabled play-back.The recorded alarm images that the TRIGGERACTION is set to REC are disabled playback.Clockwise: Jumps to the beginning of the next alarmrecording in a forward direction.Counterclockwise: Jumps to the beginning of the nextalarm recording in a backward direction.INDEXSearch Editing Area• Thumbnail DisplayMAY29.00 0:01 G1SEARCH000010009000000013000000009000000005000010008000000012000000008000000004000010007000000011000000007000000003000010006000000010000000006000000002Search Editing Area• Record List000010009DATE MAY29.00NO G2G123:59:59 T/L22:15:40 M/S ALM-TRM12O/S ALM-VMD3T/LT/L ALM-TRM1M/S ALM-PC4T/L EMRT/L MAN(TOTAL 2343RECORD)21:00:0717:33:057:23:116:59:448:55:280:01:28G3G4G3000010008000010007000010006000010005000010004000010003000010002GROUP TIME REC-MODEALL GROUPMAY29.00SEARCH: 0:01 G1SEL:←→ CHG:+– EXE:SET ESC:FSTOPALARM # SEARCH:[DISPLAY]ALLALLALLALARM SEARCHFWDREVRotateFWDREVRotate