Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 51 page image

518. Move the cursor to the editing area (NO. 2 to NO. 4) bypressing the D or C button, then repeat the steps 6and 7 to edit the schedule.9. When all settings are completed, press theSETUP/ESC button to return to the previous TIMERREC SETUP menu. Special Day TimerBefore programming this table, confirm that the ProgramTimer is programmed completely.This table allows for up to 30 days to be defined as specialdays.In this table, 30 specific user defined days are assigned toone day of the week.1. Move the cursor to TIMER SPECIAL DAY in the TIMERREC SETUP menu by pressing the D or C button, thenpress the SET button.The TIMER SPECIAL DAY SETUP table as shown belowappears on the monitor screen.2. Move the cursor to the DATE editing area by pressingthe D or C button.3. Select a month by pressing the + or - button.Move the cursor to the right by pressing the B button,then select the date by pressing the + or - button.Note: The programmed month and date will be valid forevery year.4. Move the cursor to the ACT editing area by pressingthe B button, then select the day of the week by press-ing the + or - button.5. Repeat the above steps 2 to 4 to program the otherspecial days.6. When satisfied with all special days, press theSETUP/ESC button to return to the previous TIMERREC SETUP menu.Note: To release the programmed special day timer, select“--- ” in the ACT column.Note: The program number menu (with audio) displaysonly the Group 1 editing area.5. Move the cursor to the time editing area (NO. 1) bypressing the D or C button.6. Move the cursor to the time to start and end the record-ing by pressing the A or B button, then select the timeby pressing the + or - button.Notes:• If the time (No.1) to end the recording is set to24:00, the editing function for the timers (No. 2 toNo. 4) is disabled.• If the time (No.1) to end the recording is set to12:00, the time (No. 2) to start a recording cannotbe set to a time before 12:00.• When programming a timer extended into the nextday, divide the timer event into two separate eventsand program both events separately in the programmenu or other program menu.For example,Start End0:00 7:0023:00 24:007. Move the cursor to the recording editing area forgroups by pressing the A or B button, then select therecording mode for groups by pressing the + or -button.T/L: Time Lapse RecordingM/S: Multi Shot RecordingO/S: One Shot Recording—: Disables RecordingNote: For further recording settings, refer to the record-ing mode selected described later.3-5 TIMER SPECIAL DAY SETUPDATE ACT DATE ACT DATE ACT1 JUL 4 SUN 11 ----- --- 21 ----- ---2 ----- --- 12 ----- --- 22 ----- ---3 ----- --- 13 ----- --- 23 ----- ---4 ----- --- 14 ----- --- 24 ----- ---5 ----- --- 15 ----- --- 25 ----- ---6 ----- --- 16 ----- --- 26 ----- ---7 ----- --- 17 ----- --- 27 ----- ---8 ----- --- 18 ----- --- 28 ----- ---9 ----- --- 19 ----- --- 29 ----- ---10 ----- --- 20 ----- --- 30 ----- ---3-1 PROG1(WITHOUT AUDIO)NO START END G1 G2 G3 G41 0:00 6:00 T/L T/L T/L T/LRATE 7.5 7.5 1 102 6:00 12:00 M/S - O/S O/SRATE 10 5 13 12:00 18:00 M/S M/S M/S M/SRATE 5 2 2 54 18:00 24:00 O/S M/S - M/SRATE 15 10 10SET TOTAL REC RATE ON EACH TABLEG1+G2+G3+G4= UNDER 60FPS3-1 PROG1(WITH AUDIO)NO START END G11 0:00 6:00 T/LRATE 7.52 6:00 12:00 M/SRATE 103 12:00 18:00 M/SRATE 54 18:00 24:00 O/SRATE 15