Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 25 page image

25 Connection with the PCThere are two options to communicate with the PC, the first is using Serial Port and the second is via Ethernet, when the speci-fied Network Board is installed in the Disk Recorder. Serial Port ConnectionThe SERIAL Port on the rear of the Disk Recorder conforms to RS-232C, and it can communicate with the PC by connecting asshown in the figure. 10/100BASE-T Port ConnectionIf the optional Network Board is installed in the WJ-HD500B Disk Recorder, it is enabled control from the PC via Ethernet.Shown in the figure is an example for connection.HubPersonal ComputerLANHubDigital Disk Recorder10/100BASE-T Cable(Locally Procured)16161515141413131212111110109988776655443 22311SIGNAL GND10/100BASE-TSPOTOUTIN EXT STORAGE COPYCONTROL ALARMVIDEOMODEDATA REMOTE(WV-CU50)GEN-LOCK OUTSERIALPOWERONACINOFFINOUTOUTMULTI SCREEN OUT AUDIOPersonal ComputerDigital Disk RecorderD-sub9D-sub9orD-sub2516161515141413131212111110109988776655443 22311SIGNAL GND10/100BASE-TSPOTOUTIN EXT STORAGE COPYCONTROL ALARMVIDEOMODEDATA REMOTE(WV-CU50)GEN-LOCK OUTSERIALPOWERONACINOFFINOUTOUTMULTI SCREEN OUT AUDIO 4 (ER)5 (GND)3 (TXD)6 (DR)7 (RTS)8 (CTS)2 (RXD)6 (DR)7 (GND)3 (RXD)20 (ER)5 (CTS)4 (RTS)2 (TXD)PCDB25WJ-HD500BDB91234567812345678WJ-HD500BDB9PCDB9