Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 76 page image

76DVD DRIVE SETUPThe procedures described below let you select the DVDDrive function when the specified DVD drive is installed inthe system.1. Move the cursor to DVD on the WJ-HD500 SETUP menuby pressing the C or D button, then press the SET but-ton.The DVD menu shown below appears on the monitorscreen.2. Select an item or item parameter on the menu by press-ing the D or C button.3. To return to the previous setup menu, press theSETUP/ESC button. DVD FormatRefer to PREPARATIONS for details. Alarm Recording BackupThe alarm images recorded by the disk recorder can beautomatically stored (back up) on the DVD-RAM disk bycopying the records programmed in advance.The procedures described below let you enable or disablethis function (alarm backup) on the DVD-RAM disk.1. Move the cursor to AUTO COPY(EVENT) on the DVDmenu by pressing the C or D button2. Select either OFF or ON by pressing the + or - but-ton, then press the SET button.OFF: Disables alarm data backup.ON: Enables alarm data backup.The factory default setting is OFF.The AUTO COPY(EVENT) menu shown below appearson the monitor.3. Move the cursor to the appropriate COPY column bypressing the D, C, A or B button, then select eithermode for a camera by pressing the + or - button.OFF: Disables camera alarm backup.ON: Enables camera alarm backup.4. Repeat the above step 3 to program the settings forother cameras.5. After completing the settings, press the SETUP/ESCbutton to return to the previous DVD menu.Notes:• Selecting ON for AUTO COPY(EVENT) will enablemanual or automatic alarm data backup for thespecified cameras.However, Timer Recording is required to programadditional timer settings.Refer to AUTO COPY on the Program Timer menufor details on the selected recording method.• The following operations will be disabled by AUTOCOPY(EVENT) ON.Formatting the DVD-RAM diskDisplaying DVD-RAM disk recording listPlaying back DVD-RAM disk recording listTo enable the above functions, set the parameter toOFF.10 DVDDVD FORMAT*AUTO COPY(EVENT) OFFAUTO COPY(EMERGENCY) OFFDVD DISKEND STOPDVD FULL 1%10-2 AUTO COPY(EVENT)CAM COPY CAM COPY1 OFF 9 OFF2 OFF 10 OFF3 OFF 11 OFF4 OFF 12 OFF5 OFF 13 OFF6 OFF 14 OFF7 OFF 15 OFF8 OFF 16 OFF