77 Emergency Recording BackupThis item lets you enable or disable automatic backup ofEmergency Recording data.1. Move the cursor to the AUTO COPY(EMERGENCY)parameter on the DVD menu by pressing the C or Dbutton2. Select either ON or OFF by pressing the + or - but-ton.OFF: Disables emergency data backup.ON: Enables emergency data backup.The factory default setting is OFF.Note: The following operations will be disabled byAUTO COPY(EMERGENCY) ON.Formatting the DVD-RAM diskDisplaying DVD-RAM disk recording listPlaying back DVD-RAM disk recordinglistTo enable the above functions, set the parameter toOFF. DVD Disk End SetupThis item lets you enable or disable uninterrupted storagewhen the DVD-RAM disk runs out of space.1. Move the cursor to the DVD DISKEND parameter on theDVD menu by pressing the D or C button.2. Select the desired mode by pressing the + or - but-ton.STOP: Stops storage when the disk is full.CONTINUE: Continues storage by overwriting the old-est data when the disk is full.The factory default setting is STOP. Disk Space DisplayThis item lets you select status display mode on the multi-screen monitor when the remaining storage capacity is run-ning low on the DVD-RAM disk.1. Move the cursor to the DVD FULL parameter on theDVD menu by pressing the C or D button.2. Select the desired display mode by pressing the + or- button.OFF: No warning for remaining space1 - 10%: The selected warning is issued if the remain-ing storage capacity is between 1 and 10%.The factory default setting is 1%.Note: This setting is valid when the DVD DISKEND isset to STOP on the menu.
