42SETUP MENUThe Setup Menu provides a way for controlling functionswhich are not available by a direct operation. Displaying the SETUP MenuTo display the setup menu follow the procedure below.1. Confirm that the camera and peripherals are connectedcorrectly and securely and that all system componentsare turned on.2. The Disk Recorder has been powered up successfully.3. Press the SETUP/ESC button for two seconds or more,the WJ-HD500 SETUP menu as shown below appearsautomatically on the screen of the Multiscreen Monitor.The following buttons are valid in the setup menu.D button: Moves the cursor up.C button: Moves the cursor down.A button: Moves the cursor to the left.B button: Moves the cursor to the right.+, - button: Selects an item parameter.SET button: Executes the selection and displays asubmenu for an item with the ( ) mark.SETUP/ESC button: Returns to the previous setupmenu.4. Press the SETUP/ESC button for two seconds or moreto close the setup menu and to return to the normalscreen.Notes:• The playback operation is disabled during thesetup.• The Disk Recorder can record the images set previ-ously during the setup, and it pauses the recordingto verify the setting presently made when the setupmenu is closed. The unit stops recording if thesetup menu is altered.But it will continue recording with the settingpresently made when the Disk recorder is recordingthe images manually.WJ-HD500 SETUP *.**TIMER OFFREC SETUPCOMMON SETUP*MANUAL WITHOUT AUDIO*TIMER WITHOUT AUDIO*EMERGENCY WITHOUT AUDIOMULTIPLEXER SETUPALARM SETUPDISPLAY SETUPCOMMUNICATION SETUPSYSTEM SETUPDVD
